Fluke Network & Ge Druck

Fluke Networks is the worldwide leader in certification, troubleshooting, and installation tools for professionals who install and maintain critical network cabling infrastructure. From installing the most advanced data centers to restoring telephone service after a disaster, our combination of legendary reliability and unmatched performance ensure jobs are done efficiently.

FLUKE NETWORKS DSX

The FLUKE NETWORKS DSX CableAnalyzer Series copper test solution enables testing and certification of twisted pair cabling for up to 40 Gigabit Ethernet deployments and will handle any cabling system whether it is a Cat 5e, 6, 6A, 8 or Class FA and I/II. Certifying a cable is one part of a process that starts with system design and ends with system acceptance. The faster that process goes, the more profitable you’ll be. Unfortunately, there are a lot of things that slow the process down – setting up the tester incorrectly, testing to the wrong limits, waiting for skilled technicians to analyze and troubleshoot failures, misinterpretation of results, and producing test reports that customers cannot understand

Fluke Networks DTX-CLT

The Fluke Networks DTX-CLT CertiFiber® OLTS enables you to easily and accurately certify two fibers concurrently over two wavelengths according to custom requirements or established industry specifications. Quickly and efficiently conduct troubleshooting with a convenient integrated Visual Fault Locator (VFL).

FLUKE NETWORKS innovative TS®54 TDR

The FLUKE NETWORKS innovative TS®54 TDR (Time Domain Reflectometer) is perfect for voice, data and video technicians and communication service provider technicians who need a best-in-class test set. There’s nothing else like the TS54 TDR on the market today. No longer will you need to carry a separate TDR, toner, pair identifier—everything you need is in one newly redesigned and compact test set—that’s a 62% weight reduction and a 20% cost reduction over existing products.

FLUKE NETWORKS CableIQ

FLUKE NETWORKS CableIQ qualification tester is the first cabling bandwidth tester for network technicians. This Ethernet network cable tester gives even the most novice tech the vision to see what speeds existing cabling can support, quickly isolate cabling from network problems, and discover what is at the far end of any cable. That means network techs can close trouble tickets faster, reduce on-call time, and save money by better utilizing their existing infrastructure.

FLUKE NETWORKS IntelliTone™ Pro 200

The FLUKE NETWORKS IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks is the first network cable toner and probe to offer digital and analog signaling all in one network toner and probe. That means it’s equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.

FLUKE NETWORKS MicroMapper

The FLUKE NETWORKS MicroMapperTM is a small handheld cable tester which enables network professionals to quickly and easily verify the integrity of Ethernet twisted pair cabling.

FLUKE NETWORKS MicroScanner

The FLUKE NETWORKS MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once – graphical wiremap, pair lengths, distance to fault, cable ID, and far end device.  What’s more, its integrated RJ11, RJ45, and coax cable test ports support virtually any type of low-voltage cable testing with no need for awkward adapters.  The end result is reduced test time and technician error.  That makes high-quality installations more efficient than ever.

FLUKE NETWORKS Pro3000

The FLUKE NETWORKS Pro3000 Analog Tone and Probe is your best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone® technology.

FLUKE NETWORKS Pocket Toner

The FLUKE NETWORKS Pocket Toner® connects to any voice, data, or video cable to detect open/short circuits, continuity, AC/DC voltage* and dial tone* all while protecting up to 52 volts. The Pocket Toner comes in three models and several different kit configurations so no matter what your job, you can safely install and test. All of the Pocket Toners have dual audible indicators in the main body and detachable buzzer toner units, removable push on connectors, auto shut-off and easy-to-read indicators.

GE Druck Calibrators offers Oil & Gas Solutions For upstream, midstream and downstream industry operations.

Amongst the growing complexity of regulations and fluctuating market conditions, today's oil & gas industry is faced with demands for greater efficiency and productivity. GE provides solutions that include remote monitoring, advanced sensors and scalable cyber security technologies. With our end-to-end solutions you will get more insights, optimized operations and greater efficiency.

DPI620 Genii Series

Our Elite range of GE's Druck DPI 620 Genii Series are easy to use, rugged, and highly accurate multifunction instruments for calibrating & maintaining process instrumentation. Its modular design and functionality means it can be expanded over time and tailored to applications as needs change.  With options that include HART® / Fieldbus / Profibus communications, it’s our most powerful, simple to use and highest accuracy calibrator. Now available with ATEX and IECEx approval for use in zone 1 and zone 2 classified hazardous areas.

DPI 800 Series

GE's DPI 800 Series is a complete range of advanced, robust and simple to use hand-held pressure indicators and loop calibrator instruments from our Essential range. Highly cost effective, these tools are ideal for test/calibration of many popular process parameters. Advanced features and technical innovations address more applications in less time and deliver results you can rely on from one year to the next, even in tough environmental conditions.

GE's UPS III

GE's UPS III is a high accuracy loop calibrator from our Essential range. Its size makes it rugged and extremely compact. Measuring 3” x 5” and weighing just 9.7 ounces, it fits comfortably in a shirt pocket. It is an essential tool for loop testing, instrument maintenance and valve set-up, with an easy to read display and simple to use time saving features

DPI 705 Series

Compact, robust and lightweight, the DPI 705 Series of digital handheld pressure indicators, which are part of our Essential range, are designed for single handed operations and provide many essential features required for routine maintenance and system troubleshooting

ADTS500 Series

The new ADTS500 Series of pitot static testers provides a smarter way to perform standard aircraft maintenance, troubleshooting, fault-finding and emergency aircraft on ground instrumentation validation. The ADTS500 Series is designed for ease of use. Featuring Bluetooth® wireless technology, the ADTS Touch hand terminal removes the need to run cables or hoses to the cockpit. It has an icon-driven, swipe-screen interface that makes navigating to and performing tasks quicker and more intuitive.

FLUKE IN DUBAI
FLUKE IN UAE
FLUKE IN ABU DHBAI
MEGGER IN DUBAI
MEGGER IN UAE
MEGGER IN ABU DHABI
FLUKE PRODUCTS IN DUBAI
FLUKE PRODUCTS IN UAE
MEGGER PRODUCTS IN DUBAI
MEGGER PRODUCTS IN UAE

Phone/Fax/Email

Phone : +9714 2956329

Fax : +9714 2956367

Email : eng@zenergulf.com

Address

Zener equipments and spare parts LLC PO BOX :377456
DUBAI UAE